WOODWORKING TIPS

The 3D Carving Router Bit provides the extra length needed to carve 3D shapes out of solid wood, plastic, foam, and other materials. The tapered CNC router bit design provides extra strength while ...

V-carving is a cutting method that utilizes a V-bit to create designs with different widths. The shape of the V-shaped bit creates a narrower carving at the tip of the bit and wider at the bottom...

These router cutters have V-shaped bodies of different angles. They're designed to produce V-shaped grooves, chamfers, and bevels for a wide range of applications. Design Flutes: Chamfe...

CNC V-Bits are single flute bits with one cutting edge. They are designed to be most efficient in fine detail engraving in hardwood, aluminum, brass, copper, etc. Commonly used in the engraving in...

CNC V-groove router bits are commonly used in CNC routing to produce signage with lettering and other shallow detail. These router bits for lettering are best suited to create projects with an engr...

Flush-Trim Router Bits as the name suggests these bits are used to trim the edge of one material flush with the edge of another– for example, trimming a veneered surface flush with a substrate or...

Flush trim router bit allows you to duplicate a master pattern or template. You can use it to create exactly the same shape multiple times over with similar pieces of timber. How does it work? ...

Flush-trim router bits have a pilot bearing that guides the bit during cutting. The pilot bearing is the same size as the bit’s cutting radius so that flush-trim bits can be used to trim the edge ...

The spiral bits originated in milling and CNC work, where the bit was kept on top of the work as if it would be used on a handheld router. This means that an upcut bit will pull work towards the r...